Furnace repair · Pasco, WA
A furnace that quit gets a diagnosis first and a flat-rate price second.
Gas and electric furnaces repaired for homes and businesses in Pasco, Kennewick and Richland, with the price given up front.
Chapter 01
Why a Tri-Cities furnace quits on the first cold night
The first hard frost after a long Pasco summer is when a furnace shows you which parts have been wearing out quietly. It sits idle for months, then asks every part to work at once. The hot surface ignitor cracks, the flame sensor gets coated and stops proving the flame, or the inducer motor drags and the pressure switch never closes.
Some failures are not the furnace at all. A clogged filter lets heat build up until the high limit switch shuts the burners down, and a thermostat that has lost its call will leave a healthy furnace sitting dark. That is why a no-heat call in Kennewick or Richland starts with the simple things before anyone talks about replacing parts.
Furnace in a hallway closet under a return grille, serviced by Total Quality Air
What Carlos checks before he quotes a flat rate
Total Quality Air repairs all brands and models, and the visit starts with listening. Carlos Garcia has more than 20 years in HVAC, and the first questions are what the furnace did, when it did it, and what it sounded like. That story points toward the likely fault before a panel comes off, and it saves you paying for a search.
Then the work goes in order: the thermostat call, the inducer, the pressure switch, ignition, flame proving, gas pressure, and finally the heat exchanger and flue. Following the sequence means the real fault gets found instead of the first part that looks tired. Once he knows what is wrong, you get the price up front, flat rate, with no surprises added later.
If you already hold a written proposal from another contractor for the same repair, Total Quality Air will beat it by 5%. Call the shop at (509) 205-1592, Monday to Friday, 8 AM to 5 PM. Weekend and after-hours emergency service is available by appointment, and Hablamos Español.
Chapter 03
Keeping it lit through the winter
Most winter breakdowns are cheaper to prevent than to repair at the worst moment. Check the filter monthly in the heavy-use months, because a choked filter is the most common thing that makes a good furnace overheat. A fall tune-up before demand peaks catches a weak ignitor or a loose connection while the schedule still has room.
A tune-up covers the burner and combustion, gas pressure, the flue, the blower, the electrical connections and the heat exchanger. A cracked heat exchanger is a different kind of conversation. When one is found, the furnace should be shut down and replaced rather than patched, because that part keeps combustion gases out of your air.
Put a carbon monoxide alarm near the bedrooms and test it when you change the clocks. Maintenance program members get two inspections a year, priority service and 15% off any repairs, which turns the fall check into a standing appointment instead of something you remember in December.
"Carlos was great to work with. He was professional, knowledgeable, and quickly diagnosed and fixed our HVAC issue." Joshua Larios, Google review.
A furnace past the point of repair is a job for HVAC installation, and the fall check that catches ignitor and sensor trouble early is part of the maintenance program.